Design of nominal 2” P-401 Bituminous Pavement Rehabilitation for Taxiway ‘H’ and the full depth pavement removal to narrow the existing taxiway to 25 feet in width.  Approximate cost for the project was $300,000 for the taxiway rehabilitation.  This project was designed to FAA standards for Aircraft Design Group B-1.  Project included pavement design, specifications, grading, striping and marking, erosion control, quantity take-offs, engineer’s estimate and bid package.

Design of approximately 1 mile of road relocation for Holly Springs Road to accommodate the extension of Runway 18-36 and the parallel taxiway.  Approximate engineers estimated cost for the project is $5.0 million for the road relocation.  This project was designed to NCDOT standards.  Project included quantity take-offs, pavement design, specifications, grading, storm drainage and culvert installation, erosion control, coordination and permitting with NC Department of Land Quality, NC Department of Water Quality and Army Corp of Engineers for erosion control, storm water management and wetland impacts.

Design of full depth pavement removal and replacement of approximately 6 acres of existing apron and the installation of approximately 1 acre of new apron expansion. Approximate cost for the project was $2.25 million for the apron reconstruction and expansion. This project was designed to FAA standards for a dual wheel aircraft weighing 100,000 pounds. Project included construction administration, pavement design, specifications, grading, striping and marking, erosion control, quantity take-offs, engineer’s estimate and bid package.

Preliminary design of approximately 3500 LF of two lane commercial road, horizontal and vertical alignment, storm drainage, culvert analysis and design, and grading to minimize wetlands impacts at culvert crossing were included in this project.

Design of six mile, two-lane road. Included roadway design and modeling to VDOT standards, storm water design/analysis and modeling, grading and erosion control, and permitting. Design of culvert creek crossings.

Industrial park project for Cleveland County. Project included storm water design/analysis and modeling, roadway design and modeling, grading and erosion control, and permitting.

New road project for access to new Lake Park Drive Elementary School. Included storm water design/analysis and modeling, culvert creek crossing, roadway design and modeling, grading and erosion control, sanitary sewer design/analysis and modeling, water distribution design, and permitting.

Design of new approaches for one half-mile, two-lane road with bridge replacement design input. Project included storm drainage and erosion control component.

Design of approximately 4 miles of paved dual use greenway trail for the City of Jacksonville. Project included trail design and modeling, grading, erosion control, storm drainage, quantity take-offs and permitting.

As a member of the project design/build team, provided the site/civil construction drawings and specifications for the site infrastructure of the new 90,000 SF, 800 student elementary school on 17 acres in Charlotte, NC. Project included grading, storm drainage, erosion control measures, paving, utility connections, traffic study and analysis, road widening and turn lanes.

Sixty-five lot site development project for Phase III of Gable Oaks Subdivision. Included grading and erosion control, stormwater design/analysis and modeling, roadway design and modeling, sanitary sewer design/analysis and modeling, and water distribution design.

Sixty-six lot site development project for Phase I & II of Roberta Woods Subdivision.  Project included grading and erosion control, stormwater design/analysis and modeling, roadway design and modeling, sanitary sewer design/analysis and modeling, and water distribution design.

Engineer responsible for site/civil engineering design services for Phase 2 of Building I a 95,000 SF building, building J a 175,000 SF building and building K an 80,000 SF building on part of a 26-acre complex at the International Airport Center Business Park off Yorkmont Road near Charlotte/Douglas Airport.  Project includes site layout/development plans, sediment and erosion control measures, storm drainage design and computations, grading, and water and sewer connections.

Project engineer responsible for site/civil drawings and agency approvals for infrastructure of new 146,000 SF, 1200 student middle school on a 41-acre site in Mecklenburg County. Design includes grading, storm drainage, erosion control, driveways, walkways, athletic fields, parking, and water and sewer lines for this design/build project. Submittal packages were prepared for City of Charlotte Engineering, NCDOT and Charlotte DOT approvals.

As a member of a design/build team responsible for site/civil drawings for new 15,000 SF facility at existing middle school. Project included design of sediment and erosion control measures, code landscaping, paving layout and designs, storm drainage and detention design and computations, site grading, and water and sewer connections to existing Charlotte Mecklenburg Utilities system.

Project engineer responsible for site/civil drawings and agency approvals for Phase 1 of an 850 lot residential subdivision. Design includes mass grading, storm drainage, erosion control, road design and 100-year flood study for main road creek crossing. Submittal packages were prepared for the Town of Kannapolis and NCDOT for site layout, storm drainage, water and sewer, and driveway/entrance permits for approval.

Project engineer responsible for site/civil drawings and agency approvals for a 680 lot residential subdivision. Design includes mass grading, fine grading of lots, storm drainage, erosion control, road design, water and sewer design, and eight wet ponds interconnected to function as one system for retention/detention purposes. Road improvements to the existing city and state roads including storm drainage and turn lanes were designed to meet ingress/egress requirements for the proposed traffic increase by the subdivision. Submittal packages were prepared for the St. John’s River Water Management District – SJRWMD, City of Jacksonville, Jacksonville Electric Authority -JEA (Electric, water and sewer submittals) and FDOT for site layout, storm drainage, water and sewer, offsite utility and driveway/entrance permits for approval

Project engineer responsible for design and submittal to Mecklenburg County Engineering and Building Standards of site/civil plans for event parking area, which is the initial phase of this project for Lowe’s Motor Speedway. Project included 3,000 feet of street and associated storm drainage, grading, landscape-planting design, erosion and sedimentation control measures. The project also required preparation of submittal package to NCDOT for driveway/entrance permits. The second phase of the project included site/civil plans for the eastern side of the 37,500 SF building complex. Plans include water and sewer connections, storm drainage, planting, entrances and turn lanes off NC Hwy 29.

Project engineer responsible for site/civil design for 82-acre distribution warehouse facility of 352,000 square feet and a future expansion of 250,000 square feet in Harrisburg, NC. Preliminary engineering included coordination of utility and topographic survey, aerial topography and utility location along with site layout and rough grading plans for presentation and approval by the Town of Harrisburg Planning Board. Site/civil design for this design/build project includes the design of a rail spur to serve the warehouse facility, storm drainage and detention, grading, water and sewer connections, parking, and drives.

Project engineer responsible for site/civil drawings and agency approvals for a subdivision amenity center including a central building with pool and associated athletic fields. Design included grading, storm drainage, erosion control, utilities and basic site design. Submittal packages were prepared for the SJRWMD, JEA and St. Johns County for site layout, storm drainage and water and sewer approval.

Project engineer responsible for site/civil drawings, agency approvals and design coordination for the tractor-trailer operations and maintenance facility for SE Toyota. Design included grading, storm drainage, erosion control, utilities and basic site design including parking for employees and tractor-trailer parking area for the maintenance bay area. Submittal packages were prepared for the Department of Environmental Protection and City of Jacksonville for site layout, storm drainage and water and sewer approval.

Project Engineer responsible for grading, storm drainage, erosion control plans and calculations in coordination with Haden Stanziale planners and landscape architects for a greenway plan for the City of Concord Parks & Recreation Department.